In-Stock Specials
Updated April 6, 2020
Quick Links
 SWEBEND ANGLE ROLLS |
| MODEL | CAPACITY | DESCRIPTION | PRICE & STATUS | INFO |
|---|---|---|---|---|
| New SWEBEND SB3B-65 | 2″ x 2″ x 5/16″ | New, w/ Digital Readouts, Manual Guide Rolls, Horizontal/Vertical Execution. **Compatible with Roundo R-2 Tooling** | CALL OR EMAIL | IN STOCK | INFO | PHOTO |
| New SWEBEND SB3B-75 | 3″ x 3″ x 5/16″ | New, w/ Digital Readouts, Manual Guide Rolls, Horizontal/Vertical Execution. **Compatible with Roundo R-3 Tooling** | CALL OR EMAIL | ON ORDER- SPRING 2020 |
INFO | PHOTO |
| New SWEBEND SB3-85S | 3″ x 3″ x 3/8″ | New, w/ Digital Readouts, Hydraulic Guide Rolls in 3 Axis, Horizontal/Vertical Execution. **Compatible with Roundo R-3S Tooling** |
CALL OR EMAIL | IN STOCK |
INFO | PHOTO |
| New SWEBEND SB3B-105 | 3.5″ x 3.5″ x 3/8″ Angle | New, w/ Digital Readouts, Hydraulic Drive, Manual Guide Rolls, Variable Speed, Horizontal/Vertical Execution. **Compatible with Roundo R-4 and R-4S Tooling** | CALL OR EMAIL | ON ORDER | INFO | PHOTO |
| New SWEBEND SB3S-105 | 4″ x 4″ x 1/2″ | New, w/ Digital Readouts, Hydraulic Guide Rolls, Horizontal/Vertical Execution. Demo model. **Compatible with Roundo R-4 and R-4S Tooling** | SOLD | INFO | PHOTO |
| New SWEBEND SB3S-140 | 5″ x 5″ x 1/2″ Angle | New, w/ Wireless Bluetooth Control Box, Digital Readouts, Hydraulic Drive,Hydraulic Guide Rolls, Variable Speed **Compatible with Roundo R-5, R-5S and R-52S Tooling** |
CALL OR EMAIL | ON ORDER – SPRING 2020 |
INFO | PHOTO |
| New SWEBEND SB3S-180 | 6″ x 6″ x 1/2″ Angle | New, w/ Wireless Bluetooth Control Box, Digital Readouts, Hydraulic Drive,Hydraulic Guide Rolls, Variable Speed **Compatible with Roundo R-6, R-6S and R-62S Tooling** | SOLD | INFO | PHOTO 1 | PHOTO 2 |
| SWEBEND PLATE ROLLS |
| MODEL | CAPACITY | DESCRIPTION | PRICE & STATUS | INFO |
|---|---|---|---|---|
| New SWEBEND PB3-12-10 | 10′ x 11/16″ | New, 3-Roll, Hydraulic Drive, Variable Speed, Hardened & Ground Rolls, Cone Bending | SOLD | INFO |
| New SWEBEND PB4-8-6 CNC | 6′ x 3/8″ | New, 4-Roll, Hydraulic Drive, Variable Speed, Hardened & Ground Rolls, Cone Bending, Hydraulic Lifting Roll, Powered Support Rolls Under Lower Roll, Multi-axis SEVEN GOLD CNC Control. |
CALL OR EMAIL | SOLD NEW MODEL ON ORDER! |
INFO | PHOTO | PHOTO 2 |
 IRONWORKERS |
|||||||||
| SUNRISE CNC IRONWORKERS | SUNRISE CNC PUNCHING MACHINES |
|
MODEL |
CAPACITY |
DESCRIPTION |
PRICE & STATUS |
INFO |
|---|---|---|---|---|
| New SUNRISE APS-30080M Automatic Plate Processing System | 88 Tons | 12″ Plate | New, Fully-Automatic Flat Bar Punch and Shear System, 12″ x 20′ Capacity with Rack & Pinion Drive System, Triple Punch, New PC Controller with WiFi, Hydraulic Punch Stripper, Hydraulic Plate Shear Hold-Down, Pneumatic Material Clamping System, Anti-twist Plate Shear System, 2 Year Warranty. | $179,950 IN-STOCK! |
INFO|
VIDEO
|
| New SUNRISE ALS-1506 Automatic Angle and Plate Processing System | 88 Tons | 6″ Angle and Plate | New, 20′ Fully-Automatic Angle Punch and Shear System, 2″ to 6″ Angle and 2″ to 6″ Flat-Bar, New 1.5″ QUAD Punch (two 1.5″ punches for each leg of angle), Hydraulic Punch Strippers, Rack and Pinion Drive System, New PC Controller with WiFi and Nesting, Pneumatic Material Clamping System, 2 Year Warranty. |
CALL OR EMAIL | June Delivery |
INFO|
VIDEO
|
| New SUNRISE IW-185SD CNC Ironworker with 120″ Gauge Table, Automatic CNC Shear | 185 Tons | 8″ Angle | 30″ Plate |
New, Semi-Automatic CNC Positioning System with full structural 120″ x 16″ travel table, CNC Plate Shear in-feed System, Hydraulic Plate & Angle Shear Hold-Downs, Hydraulic Punch Stripper, Mitsubishi Servo Motors, New 15″ PC Touch-Screen Control with WiFi, Ball Transfers, Ethernet, DXF Import, 2″ Punch Capacity, Oil Cooler, Auto Lubrication System, Includes Efficiency Package, 2 Year Warranty. |
$139,950 IN-STOCK! |
INFO|
VIDEO
|
| New SUNRISE IW-110SD CNC Ironworker with 120″ Gauge Table, Automatic CNC Shear | 110 Tons | 6″ Angle | 24″ Plate |
New, Semi-Automatic CNC Positioning System with full structural 120″ x 16″ travel table, CNC Plate Shear in-feed System, Hydraulic Plate & Angle Shear Hold-Downs, Hydraulic Punch Stripper, Mitsubishi Servo Motors, New 15″ PC Touch-Screen Control with WiFi, Ball Transfers, Ethernet, DXF Import, 2″ Punch Capacity, Oil Cooler, Auto Lubrication System, Includes Efficiency Package, 2 Year Warranty | $119,950 IN-STOCK! |
INFO|
VIDEO
|
| New SUNRISE IW-110SD with Semi-CNC | 110 Tons | 6″ Angle | 24″ Plate | New, Semi-Automatic CNC Positioning System, Hydraulic Plate Shear Hold-Downs, Hydraulic Stripper, full structural 40″ x 16″ travel table, New PC Touch-Screen Control with WiFi, Ball Transfers, Ethernet, DXF Import, 2″ Punch Capacity, Includes Efficiency Package, 2 Year Warranty | INFO|
VIDEO
|
|
| New SUNRISE PM-60T with ANC, 20′ Automatic Punch In-Feed | 60 Tons | 6″ Angle | 12″ Plate | Channel | New, 20′ Fully-Automatic CNC Punch System, Hydraulic Plate & Angle Shear Hold-Downs, Hydraulic Stripper, Touch-Screen Controller, Includes Efficiency Package, 2 Year Warranty | INFO |PHOTO| PHOTO 2|PHOTO 3 |
| SUNRISE DUAL-CYLINDER IRONWORKERS | SUNRISE SINGLE-CYLINDER IRONWORKERS |
|
MODEL |
CAPACITY |
DESCRIPTION |
PRICE & STATUS |
INFO |
|---|---|---|---|---|
| New SUNRISE PM-38T | 40 Tons | X | New, Single-End Punch, Patented High-Speed System, Includes Efficiency Package, 2″ Oversize Punch Die-Block, 2 Year Warranty | $8,995 | IN STOCK | INFO | PHOTO |
| New SUNRISE IW-50M | 50 Tons | 3″ Angle | New, Includes Efficiency Package, 2 Year Warranty | $8,995 |IN STOCK | INFO | PHOTO |
| NEW SUNRISE IW-50K | 50 Tons | 3″ Angle | New, Includes Efficiency Package, 2 Year Warranty. Also available in Single Phase! | $10,995 |IN STOCK | INFO |
VIDEO
|
| NEW SUNRISE IW-66K | 66 Tons | 4″ Angle | New, Hydraulic Plate/Angle/Bar Shear Hold-Down, Includes Efficiency Package, 2 Year Warranty. Also available in Single-Phase! | $14,450 |IN STOCK | INFO |
VIDEO
|
| New SUNRISE IW-66KB | 66 Tons | 4″ Angle | New, Hydraulic Plate/Angle/Bar Shear Hold-Down, 12″ Integrated Bending Attachment, Includes Efficiency Package, 2 Year Warranty. Also available in Single Phase! |
$15,850 | IN STOCK | INFO |
VIDEO
|
| NEW SUNRISE PM-60LT | 66 Tons | X | New, Single-End Punch, Patented High-Speed, Deep-Throat, Includes Efficiency Package, 2″ Oversize Punch Die-Block, 2 Year Warranty. | $12,250 | IN STOCK |
INFO | PHOTO |
| New SUNRISE IW-66S | 66 Tons | 5″ Angle | 14″ Plate | New, Dual Cylinder, High-Speed, Includes Efficiency Package, 2″ Oversize Die-Block, 2 Year Warranty |
$17,750 | IN STOCK | INFO |
VIDEO
|
| New SUNRISE IW-66SD | 66 Tons | 5″ Angle | 14″ Plate | New, Dual Cylinder, High-Speed, Deep Throat, Includes Efficiency Package, 2″ Oversize Die-Block,2 Year Warranty | $21,250 |IN STOCK | INFO |
VIDEO
|
| New SUNRISE IW-88S | 88 Tons | 6″ Angle | 18″ Plate | New, Dual Cylinder, High-Speed, Includes Efficiency Package, 2″ Oversize Die-Block, 2 Year Warranty | $21,450 | IN STOCK |
INFO |
VIDEO
|
| New SUNRISE IW-88SD | 88 Tons | 6″ Angle | 18″ Plate | New, Dual Cylinder, High-Speed, Deep-Throat, Includes Efficiency Package, 2″ Oversize Die-Block, 2 Year Warranty | $25,250 | IN STOCK | INFO |
VIDEO
|
| New SUNRISE IW-95KD |
95 Tons | 5″ Angle | 16″ Plate |
New, Dual Cylinder, Vertical Design, High-Speed, Deep-Throat, Hydraulic Shear Hold-down, Includes Efficiency Package, 2″ Oversize Die-Block, 2 Year Warranty | $26,950 | IN STOCK | INFO |
VIDEO
|
| New SUNRISE IW-110S | 110 Tons | 6″ Angle | 24″ Plate |
New, Dual Cylinder, High-Speed, Includes Efficiency Package, 2″ Oversize Die-Block, 2 Year Warranty | $26,750 | IN STOCK | INFO |
VIDEO
|
| New SUNRISE IW-110SD | 110 Tons | 6″ Angle | 24″ Plate |
New, Dual Cylinder, Deep Throat, High-Speed, Includes Efficiency Package, 2″ Oversize Die-Block, 2 Year Warranty | $30,950 | IN STOCK | INFO |
VIDEO
|
| New SUNRISE IW-110SD | 110 Tons | 6″ Angle | 24″ Plate |
New, Dual Cylinder, Deep Throat, High-Speed, Hydraulic Plate-Shear Hold-Down, Includes Efficiency Package, 2″ Oversize Die-Block, 2 Year Warranty | $34,900 | IN STOCK | INFO |
VIDEO
|
| New SUNRISE IW-135S | 135 Tons | 6″ Angle | 24″ Plate |
New, Dual Cylinder, Deep Throat, High-Speed, Includes Efficiency Package, 2″ Oversize Die-Block, 2 Year Warranty | $33,250 | ON ORDER |
INFO |
VIDEO
|
| New SUNRISE IW-135SD | 135 Tons | 6″ Angle | 24″ Plate |
New, Dual Cylinder, Deep Throat, High-Speed, Includes Efficiency Package, 2″ Oversize Die-Block, 2 Year Warranty | $37,500 | IN STOCK |
INFO |
VIDEO
|
| New SUNRISE PM-130LT | 135 Tons | New, Single-End Punch, Deep Throat, High-Speed, Includes Efficiency Package, 2″ Oversize Die-Block, 2 Year Warranty | $24,950 | ON ORDER |
INFO |
VIDEO
|
| New SUNRISE IW-185SD | 185 Tons | 8″ Angle | 30″ Plate |
New, Dual Cylinder, Deep Throat, High-Speed, Hydraulic Plate and Angle Shear Hold-down, Includes Efficiency Package, 2″ Oversize Die-Block, 2 Year Warranty | $57,650 | ON ORDER | INFO |
VIDEO
|
| New SUNRISE IW-185SD | 185 Tons | 8″ Angle | 30″ Plate |
New, Dual Cylinder, Deep Throat, High-Speed, Hydraulic Plate-Shear Hold-down, Includes Efficiency Package, 2″ Oversize Die-Block, 2 Year Warranty | $53,700 | APRIL |
INFO |
VIDEO
|
| EFFICIENCY PACKAGE 40″ Touch & Cut Back-gauge | Punch Gauge Table | Notcher Gauge Table | Magnetic LED Work Light | Starter Set of 11 Punches & Dies |Structural Die Block for up to 2″ diameter hole capacity (Dual-Cylinder and PM Models Only) |
| SUNRISE HORIZONTAL BENDER |
| MODEL | CAPACITY | DESCRIPTION | PRICE & STATUS | INFO |
|---|---|---|---|---|
| New SUNRISE HBM-82 | 82 Tons | New, Horizontal Bender, programmable controller, manual back-gauge, 14″ stroke, 2 year warranty. |
$29,995 | IN STOCK | INFO |
VIDEO
|
| New SUNRISE HBM CNC | ALL MODELS | New, add to either HBM 45 or 82 model, multi-program controller, programmable 40″ CNC controlled backstop, 2 year warranty. (Not suitable for Manual HBM-45). | $11,995 | IN STOCK | INFO |
VIDEO
|
| New SUNRISE HBM-45 | 45 Tons | New, Horizontal Bender, programmable controller, manual back-gauge, 9″ stroke, 2 year warranty. | $19,995 | IN-STOCK |
INFO |
VIDEO
|
| Pre-Owned SUNRISE HBM-45 |
45 Tons | New 2018, Serial 58020412, Horizontal Bender, CNC positioning, CNC back-gauge, 9″ stroke, tooling. | $24,995 | IN STOCK |
INFO || PHOTO 1 | PHOTO 2 | PHOTO 3 |
Roundo®ANGLE ROLLS |
| MODEL | CAPACITY | DESCRIPTION | PRICE & STATUS | INFO |
|---|---|---|---|---|
| REFURBISHED ROUNDO® R-4S | 4″ x 4″ x 1/2″ | New in 1998, complete rebuild, great condition, warranty, w/ Digital Readouts with bluetooth controller, |
CALL OR EMAIL | SPRING 2020 | PHOTOS COMING SOON! |
| REFURBISHED ROUNDO® PASS 205/6 |
6′ x 3/8″ | New in 2003, refurbished, great condition, warranty, w/ Four Digital Readouts (one for each end of both side bending rolls), Independently adjustable pinch pressure control, Hardened rolls, Cone bending attachment. |
CALL OR EMAIL | IN STOCK | PHOTO |
Roundo®PLATE ROLLS |
| MODEL | CAPACITY | DESCRIPTION | PRICE & STATUS | INFO |
|---|---|---|---|---|
| New ROUNDO® PM-0/650 | 24″ x 10 ga. | New,High Speed Production roll, Pneumatic ejection, automatic cycle, in-feed arms | CALL OR EMAIL | IN STOCK | |
VIDEO
|
| New ROUNDO® PAS 700/10 | 10′ x 2-3/4″ | New, multi-axis CNC Control, CNC Controlled interpolation, Hardened & Ground Rolls. | CALL OR EMAIL | CALL OR EMAIL |
 LEMAS 3 – Roll Plate Rolls |
| MODEL | CAPACITY | DESCRIPTION | PRICE & STATUS | INFO |
|---|---|---|---|---|
| New LEMAS TR 80/3 | 3′ x 13 Ga. | New, Direct–Drive, 3-Roll, Initial-Pinch, Digital Readouts, Hardened Rolls and more! |
$13,975 | IN STOCK |
INFO | PHOTO |
| New LEMAS TR 80/4 | 4′ x 14 Ga. | New, Direct–Drive, 3-Roll, Initial-Pinch, Digital Readouts, Hardened Rolls and more! |
$14,250 | SOLD |
INFO|PHOTO |
| New LEMAS TR 100/4 | 4′ x 11 Ga. | New, Direct–Drive, 3-Roll, Initial-Pinch, Digital Readouts, Hardened Rolls and more! |
$15,750 | IN STOCK |
INFO | PHOTO |
| New LEMAS TR 120/4 | 4′ x 10 Ga. | New, Direct-Drive, 3-Roll, Initial-Pinch, Digital Readouts, Hardened Rolls and more! |
$19,500 | IN STOCK |
INFO | PHOTO |
| New LEMAS TR 160/4 | 4′ x 1/4″ | New, Direct–Drive, 3-Roll, Initial-Pinch, Digital Readouts, Hardened Rolls and more! |
$20,400 | IN STOCK |
INFO | PHOTO |
| New LEMAS TR 100/5 | 5′ x 12 Ga. | New, Direct-Drive, 3-Roll, Initial-Pinch, Digital Readouts, Hardened Rolls and more! |
$15,900 | APRIL |
INFO | PHOTO |
| New LEMAS TR 120/5 | 5′ x 10 Ga. | New, Direct-Drive, 3-Roll, Initial-Pinch, Digital Readouts, Hardened Rolls and more! |
$19,750 | SOLD – MORE ON ORDER |
INFO | PHOTO |
| New LEMAS TR 140/5 | 5′ x 3/16″ | New, Direct–Drive, 3-Roll, Initial-Pinch, Digital Readouts, Hardened Rolls and more! |
$20,500 | SOLD – MORE ON ORDER |
INFO | PHOTO |
| New LEMAS TR 160/5 | 5′ x 1/4″ | New, Direct–Drive, 3-Roll, Initial-Pinch, Digital Readouts, Hardened Rolls and more! |
$20,750 | IN STOCK |
INFO | PHOTO |
| New LEMAS TR 180/5 | 5′ x 5/16″ | New, Direct–Drive, 3-Roll, Initial-Pinch, Digital Readouts, Hardened Rolls and more! |
$23,850 | SOLD – MORE ON ORDER |
INFO | PHOTO |
| New LEMAS TR 200/5 | 5′ x 1/2″ | New, Direct–Drive, 3-Roll, Initial-Pinch, Digital Readouts, Hardened Rolls and more! |
$28,400 | SOLD – MORE ON ORDER |
INFO| PHOTO |
| New LEMAS TR 160/6 | 6′ x 3/16″ | New, Direct–Drive, 3-Roll, Initial-Pinch, Digital Readouts, Hardened Rolls and more! |
$22,400 | SOLD |
INFO | PHOTO |
| New LEMAS TR 180/6 | 6′ x 1/4″ | New, Direct–Drive, 3-Roll, Initial-Pinch, Digital Readouts, Hardened Rolls and more! |
$26,850 | IN STOCK |
INFO | PHOTO |
| New LEMAS TR 200/6 | 6′ x 3/8″ | New, Direct–Drive, 3-Roll, Initial-Pinch, Digital Readouts, Hardened Rolls and more! |
$29,950 | APRIL |
INFO | PHOTO |
| New LEMAS TR 200/8 | 8′ x 5/16″ | New, Direct–Drive, 3-Roll, Initial-Pinch, Digital Readouts, Hardened Rolls and more! |
$33,900 | SOLD |
INFO | PHOTO |
| LEMAS 4-Roll Plate Rolls |
| MODEL | CAPACITY | DESCRIPTION | PRICE & STATUS | INFO |
|---|---|---|---|---|
| New LEMAS 4-TR 80/3 | 3′ x 10 Ga. | New, Direct – , 4-Roll, Double Pinch, Digital Readouts, Hardened & Ground Rolls and more! |
SOLD |
INFO | PHOTO |
| New LEMAS 4-TR 120/4 | 4′ x 10 Ga. | New, Direct – , 4-Roll, Double Pinch, Digital Readouts, Hardened & Ground Rolls and more! |
$27,675 | ON ORDER |
INFO | PHOTO |
| USED LEMAS 4-TR 120/4 | 4′ x 10 Ga. | Used, Direct – , 4-Roll, Double Pinch, Digital Readouts, Hardened & Ground Rolls and more! |
AVAILABLE |
INFO | PHOTO |
| New LEMAS 4-TR 160/5 | 5′ x 1/4″ | New, Direct – Drive, 4-Roll, Double Pinch, Digital Readouts, Hardened & Ground Rolls and more! |
$29,750 | ON ORDER |
INFO | PHOTO |
| New LEMAS 4-TR 180/6 | 6′ x 1/4″ | New, Direct – Drive, 4-Roll, Double Pinch, Digital Readouts, Hardened & Ground Rolls and more! |
SOLD |
INFO | PHOTO |
| New LEMAS 4-TR 200/6 | 6′ x 3/8″ | New, Direct – Drive , 4-Roll, Double Pinch, Digital Readouts, Hardened & Ground Rolls and more!> |
$43,775 | SOLD |
INFO | PHOTO |
 AKYAPAK ANGLE AND SECTION ROLLS |
| MODEL | CAPACITY | DESCRIPTION | PRICE & STATUS | INFO |
|---|---|---|---|---|
| New AKYAPAK APK-50 | 2″ x 2″ x 3/16″ | New, w/ Digital Readouts, Standard Tools ,Horizontal or Vertical |
$12,500 | IN STOCK | INFO | PHOTO |
| New AKYAPAK APK-61 | 2″ x 2″ x 1/4″ | New, w/ Digital Readouts, Standard Tools , Horizontal or Vertical |
CALL OR EMAIL | IN STOCK |
INFO | PHOTO |
| New AKYAPAK APK-81 | 3″ x 3″ x 5/16″ | New, w/ Digital Readouts, Hydraulic Drive,Hydraulic Guide Rolls, Standard Tools,Horizontal or Vertical | CALL OR EMAIL | IN STOCK | INFO | PHOTO |
| New AKYAPAK APK-101 | 4″ x 4″ x 3/8″ | New, w/ Digital Readouts, Hydraulic Drive,Hydraulic Guide Rolls, Standard Tools,Horizontal or Vertical |
CALL OR EMAIL | IN STOCK |
INFO | PHOTO |
| New AKYAPAK APK-121 | 5″ x 5″ x 1/2″ | New, w/ Digital Readouts, Hydraulic Drive, Hydraulic Guide Rolls, Standard Tools |
CALL OR EMAIL | IN STOCK |
INFO | PHOTO |
| New AKYAPAK APK-180 | 6″ x 6″ x 5/8″ | New, w/ Digital Readouts, Hydraulic Drive, Hydraulic Guide Rolls, Digital Readouts for Guide Rolls,Standard Tools. |
CALL OR EMAIL | IN STOCK |
INFO | PHOTO |
| AKYAPAK PLATE ROLLS |
| MODEL | CAPACITY | DESCRIPTION | PRICE & STATUS | INFO |
|---|---|---|---|---|
| New AKYAPAK AHS 30/08 4-Roll | 10′ x 3/8″ | New, 4-Roll, Hardened & Ground Rolls, Cone Bending, Digital Readouts, Prepared for Top Support. | CALL OR EMAIL | INFO | PHOTO |
| New AKYAPAK AHS 30/10 4-Roll | 10′ x 1/2″ | New, 4-Roll, Hardened & Ground Rolls, Cone Bending, Digital Readouts, Prepared for Top Support. |
CALL OR EMAIL | 8-10 Weeks |
INFO | PHOTO |
| New AKYAPAK AHS 30/13 4-Roll | 10′ x 5/8″ | New, 4-Roll, Hardened & Ground Rolls, Cone Bending, Variable Speed, Digital Readouts, Prepared for Side Supports & Top Support. |
CALL OR EMAIL | IN STOCK |
INFO | PHOTO |
| New AKYAPAK AHS 30/16 4-Roll | 10′ x 3/4″ | New, 4-Roll, Digital Readouts, Hardened & Ground Rolls and more! |
CALL OR EMAIL | IN STOCK |
INFO | PHOTO |
| New AKYAPAK AHS 30/20 4-Roll | 10′ x 1″ | New, 4- Roll, Digital Readouts, Hardened & Ground Rolls, Variable Speed. |
CALL OR EMAIL | IN STOCK |
INFO | PHOTO |
 BSP Punching Systems |
| MODEL | CAPACITY | DESCRIPTION | PRICE & STATUS | INFO |
|---|---|---|---|---|
| New BSP Systems P80-2T | 3″ x 3″ | New, 10′ Tube Punching Machine. 12 Ton, Up to 3″ x 3″ Tubing (Square or Round), Processes Two Tubes at Once! |
$129,950 List SPECIAL PRICE: $109,950 IN STOCK |
INFO | PHOTO |
100% Factory Authorized service and warranty work is performed by Trilogy’s senior technicians.
Social Links!