image2_20140321215416

AKYAPAK Welding Solutions – Chain Rotators

Rope Rotators are used to rotate and position pieces with planar section. Required welding edge can be created by realizing positioning according to the rotated part on an endless rope. It is possible to adjust the height of the piece placed on the machine. This provides convenience to the operator during welding.

The product comprises of housing, rope drive systems, electrical panel and remote controlled operator unit and rovides the best structural protection. Measures have been taken against the carrier with a lift rope break. Even if bobbin carrier part of the elevator rope overlaps. The operator or the machine will not damage any area.

Operators can rotate the pieces mounted on the rope clockwise or counterclockwise, precisely, well-aligned and easily. They can also be moved downward – upward to provide the desired height. Rope rotator set comprises of 2 driven units. Number of units can be increased according to the application and weight conditions.

Both of the units which constitute the rope rotator set are driven and these two unit can be operated in synchronization or independently. Thus, angular height adjustment of the work piece is enabled.

STANDARD FEATURES

Purpose of Chain Rotators is rotating and positioning pieces with planar section. Required welding edge can be created by realizing positioning according to the rotated part on an endless chain. It is possible to adjust the height of the piece placed on the machine. This provides convenience to the operator during welding.

The product comprises of housing, chain drive systems, electrical panel and remote controlled operator unit and provides the best structural protection.

Operators can rotate the pieces mounted on the chain clockwise or counterclockwise, precisely, well-aligned and easily. They can also be moved downward – upward to provide the desired height. Chain rotator set comprises of 2 driven units. Number of units can be increased according to the application and weight conditions.

Both of the units which constitute the chain rotator set are driven and these two unit can be operated in synchronization or independently. Thus, angular height adjustment of the work piece is enabled.

Akyapak Makine includes 6 to 12 tons chain rotators in its standard lists. However, custom production can be realized up to 20 tons.

Standard Features:

  • Remote controller with 5 meter cable length
  • Automatic closing of chain levers upon loading the piece
  • Sturdy chain gear structure
  • Reducer mechanisms with auto-blockage system
  • Motors with brake & forced fan cooling

Optional Features:

  • Wireless remote controller
  • Special insulations for worksite conditions


OVER 120 YEARS TECHNICAL EXPERIENCE | THE NEW CHOICE IS TRILOGY MACHINERY



All Capacities in Mild Steel – Prices Subject to Change Without Notice

<br>20' In-feed table with squaring rollers <img src=image/plate4.jpg border=1><br>Touch-screen controller featuring multiple programs <img src=image/plate3.jpg border=1><br>Linear-Rail mounted squaring arm <img src=image/plate2.jpg border=1><br>Knurled drive roller featuring dual proximity sensors for accurate plate positioning <img src=image/plate1.jpg border=1><br>Mitsubishi Servo Motor Driven featuring dual linear encoders <br>Optional Hydraulic Plate Shear Hold-Down <br>Optional Hydraulic Angle Shear Hold-Down
WordPress Video Lightbox Plugin